|
Mounting Options:
Hollow Metal |
Plate |
|
STANDARD FEATURES:
a) Mechanical operation - Locks and unlocks by key. For key removal in locked
position only, specify a single wing escutcheon on lock mounting or access door
b) Durable case - Malleable iron case, ž" thick cold drawn steel cover.
c) Corrosion resistance - Working parts are corrosion resistant.
d) Heavy duty lever tumblers - 5 spring temper brass tumblers, activated by heavy
phosphor bronze springs. Precision fit to locking fence.
e) Large, solid deadbolt - Galvanized steel, 1-1/2" x ū"
f) Bolt throw - 5/8"
g) Bolt projection - ―" and 1-1/4" are standard, specify one.
h) Finish - Standard is USP primed
OPTIONAL FEATURES:
a) High security - Six tumbler model offers greater pick resistance.
b) Bolt projection - May be varied to suit conditions, consult factory.
c) Mounting - Hollow metal or plate mounting
d) Finish - Galvanized
ACCESSORIES:
a) 10-4B Mortise
Keeper
b) 10-4BL Mortise Keeper with switch
c) 10-4DB Mortise Keeper with dustbox
d) 10-4F Surface Keeper |
4B |
4BL |
4DB |
4F |
|
Mounting Options:
Hollow Metal |
|
STANDARD FEATURES:
- Mechanical operation - Unlocks by key.
- Automatic snap-locking - When door is closed.
- Durable case - Malleable iron case with 1/4" cold
drawn steel cover.
- Corrosion resistance - Working parts are corrosion resistant.
- Heavy duty lever tumblers - 5 spring-temper brass tumblers,
activated by heavy phosphor bronze springs. Precision fit to locking fence.
- Large solid latchbolt - Investment cast stainless steel
1" x 7/16" flush when retracted.
- Bolt throw - 7/16"
- Investment cast key cylinder - One piece bronze alloy
with paracentric keyway.
- Supplied - with four 1/4-20 x 1/2" flat head security
screws.
- Finish - Standard is USP
OPTIONAL FEATURES:
- Hollow metal mounting - Combined with 1/2" bolt
projection for in-the-door pocket mounting.
- Square bolt - Flush and 1/2" projection stainless
steel square bolt for special applications
- Finish - Galvanized
ACCESSORIES (Must be purchased separately):
- 17-4F - Keeper/pull for surface mounted lock.
- 17-4FPD - Food pass door with keeper (specify
3FP hinges separately)
|
Mounting Options:
Hollow Metal |
|
STANDARD
FEATURES:
- Maxi-MogulŪ key cylinder - Provides
maximum pick resistance. UL437 listed.
- Case - Malleable iron.
- Corrosion resistant - Working parts
are corrosion resistant.
- Tamper resistant construction
- Latchbolt throw - 7/16". Flush
when retracted, or ―" projection for hollow metal pocket installation.
- Large, solid latchbolt - Investment
cast stainless steel, 1" x 7/16"
- Supplied - With four ž-20 x 1-1/2"
flat head security screws
OPTIONAL FEATURES:
- Square bolt - Flush and ―" projection
stainless steel square bolt for special applications.
- 110 Mogul key cylinder - For existing
applications.
- Cylinder finish - US4 standard,
- US26,US26D, US10 and US10B available
- Hollow metal mounting - Combined
with ―" bolt projection for in the door pocket mounting.
- Keying - Master keying is available
- Finish - Galvanized
ACCESSORIES:
- 17-4F Keeper/pull for surface mounted
lock
- 17-4FPD Food pass door with 17-4
keep/pull (specify 3FP hinges separately)
|
|
STANDARD
FEATURES:
- Automatic deadlocking (Series 30)
- Deadlocks on door closure, unlocks by key. Key is removable in the latch position
only.
- Mechanical operation (Series 30D)
- Deadlocks and unlocks by key. Key is removable in both locked and unlocked condition.
- Durable case - Malleable iron case
with 3/16" thick steel cover.
- Corrosion resistance - Working parts
are corrosion resistant.
- Heavy duty lever tumblers - 5 spring
temper brass tumblers, activated by heavy phosphor bronze springs. Precision fit
to locking fence.
- Large, solid hookbolt - Galvanized,
hardened steel, 1/2" thick.
- Bolt movement - 5/8" lift.
- Investment cast key cylinder - One
piece bronze alloy with paracentric keyway.
- Finish - USP standard.
OPTIONAL FEATURES:
- Mounting - Hollow metal, grille,
or plate door mounting.
Hollow Metal |
Plate |
- Finish - Galvanized
ACCESSORIES:
- 30-4BL - Mortise keeper with switch/mounting
screws.
- 30-4DB - Mortise keeper with dustbox/mounting
screws.
- 30-4F - Surface mounted keeper/mounting
screws.
|
Mounting Options:
|
Standard Features:
- Knob operation(60K)
Knob will operate latchbolt unless deadlocked
- Mechanical operation-
Locks and unlocks by key. A half-turn of the key. A full turn of the key, in the
opposite direction, deadlocks the latchbolt.
- Snap-Locks Automatically when door is closed.
- Malleable Iron Case and 3/8" thick cold drawn steel
cover
- Corrosion resistant working parts
- Latchbolt - solid steel, with two, concealed, hardened-steel
roller pins to resist sawing.
Latchbolt is galvanized.
- Lever tumblers made of spring-temper brass, activated
by heavy, phosphur-bronze springs.
- Key cylinder - one piece, bronze alloy with paracentric
keyway.
- Bolt size - 2"- 3/4"
- Bolt throw - 3/4"
- Finish - Case and cover USP, primed for paint.
- Knobs and roses (Series 60K)
Solid brass, attached to a 3/8" square spindle by exposed set screws on one
side, and a concealed cross-pin on the other. Knobs are provided for both sides
unless specified otherwise.
Optional Features:
- Bolt projection may be varied to suit conditions. Consult
factory for available variations.
- Finish - Case and cover USP, primed for paint.
- Mountings available for grille, hollow metal, plate
or wood doors.
- Single knob (60K Series)
- Safety knob (60K Series)
- 60-4B - Mortise keeper
- 60-4BL - Keeper with switch
- 60-4DB - Keeper with dust box
|
Mounting
Options:
|
Standard Features:
- Deadlocks automatically when door is closed.
Unlocks by key.
- Malleable Iron Case and steel cover.
- Corrosion resistant working parts.
- Latchbolt - solid steel with two concealed,
hardened-steel roller pins, to resist sawing.
Latchbolt is galvanized.
- Lever tumblers made of spring-temper brass,
activated by heavy, phosphor-bronze springs.
- Key cylinder - one piece, bronze alloy with
paracentric keyway.
- Bolt size - 2" - 3/4"
- Bolt throw - 3/4"
- Finish - Case and cover USP, primed for paint.
Optional Features:
- Bolt projection may be varied to suit conditions.
Consult factory for available variations.
- Finish - Case and cover : galvanized for corrosion
resistance.
- Mountings available for hollow metal, plate or
wood doors.
- Mortise keeper
70-4B
- Keeper with switch
70-4BL
- Keeper with dust box
70-4DB
|
Mounting Options:
|
STANDARD FEATURES:
- Mechanical operation - Locks and unlocks by key. For
key removal in locked position only, specify a single wing escutcheon on lock
mounting or access door.
- Durable case - Drop forged case with 3/8" thick
cold drawn steel cover.
- Corrosion resistance - Working parts are corrosion resistant.
- Heavy duty lever tumblers - Spring temper brass, activated
by heavy phosphor bronze springs. Series 80 use five tumblers, Series 80-6 use
six. Precision fit to locking fence.
- Large, solid deadbolt - Galvanized steel with three
hardened steel roller pins, 2" x ū". Projects ―" when retracted.
- Bolt throw - ū"
OPTIONAL FEATURES:
- High security - Six tumbler model offers greater pick
resistance.
- Bolt projection - May be varied to suit conditions,
consult factory.
- Finish - Case and cover may be galvanized for corrosion
resistance.
- Mounting - Hollow metal, plate or grille mounting.
ACCESSORIES (Must be ordered separately):
- 80-4B Mortise keeper
- 80-4BL Mortise keeper with switch
- 80-4DB Mortise keeper with dustbox
- 80-4F Surface mounted keeper
|
|
STANDARD FEATURES:
- Deadbolt operation - Lock
and unlock by key.
- Latchbolt snap-locking -
When door is closed, operated by knobs.
- Maxi-Mogul key cylinder
- Level 1 cylinder standard, higher security levels available on request.
- Heavy duty knobs - Solid
brass knobs and roses attached to spindle by exposed set screws on one side, and
concealed cross-pin on the other. Provided on both sides unless otherwise specified.
3/8" square spindle on diamond.
- Armored front - Adjustable
from flat to 1/8" in 2" bevel. Consists of a galvanized steel backplate,
and brass faceplate.
- Durable case - Cast brass
alloy.
- Corrosion-resistance - Working
parts are corrosion-resistant material.
- Large, solid brass latch/deadbolt
-
- Latchbolt size: 1-1/4"
x 9/16"
- Deadbolt size: 1-3/4"
x 5/8"
- with hardened steel inserts
to resist sawing.
- Bolt/latch throw - Deadbolt:
1" throw
- Latchbolt: ―" throw,
flush when retracted
- Supplied - With strike and
mounting screws.
- Finish - Trim, US4 satin
brass
OPTIONAL FEATURES:
- Mogul cylinder - Specify
"MO" for keying locks into existing 110 Series Mogul key system.
- Single knob - Specify side.
- Safety knob - Specify "SK".
- For safety knobs on both
sides, specify double "SK"
- Modification for builders
hardware type cylinders - Locks may be modified to accept builders hardware cylinders.
Cylinders must be 1-5/32" diameter, and 1-1/4" long, from underneath
head including cam. Must be removable cam. Cylinders and keys must be sent to
Folger Adam Security Inc. for assembly into locks.
ACCESSORIES:
- 110-4DB - Mortise strike
with dust box and mounting screws
- 110-4BL - Mortise strike
with dust box , switch and mounting screw
4BL |
4DB |
|
|
STANDARD FEATURES:
- Automatic deadlocking - When door is closed.
- Knob operation - Provides staff convenience of knob
operation, with security of lockout feature.
- Maxi-Mogul key cylinder - Level 1 cylinder standard,
higher security levels available on request.
- Heavy duty knobs - Solid brass knobs and roses, attached
to spindle by exposed set screws on one side, and, depending upon function, by
either concealed set screws, or a concealed cross-pin on the other. 3/8"
square spindle on diamond.
- Armored front - Adjustable from flat 1/8" in 2"
bevel. Consists of stainless steel backplate and brass faceplate.
- Durable case - Cast bronze alloy with closed front on
case and latch-bearing surfaces for strength.
- Corrosion-resistance - Working parts are stainless steel
or other corrosion-resistant metal.
- Large, solid latchbolt - 1-3/8" x 5/8", stainless
steel.
- Latchbolt movement - ū" throw, flush when retracted.
- Field reversible - Latchbolt and deadlock actuator may
be rotated to reverse handing, as may cylinder and knobs.
- Supplied - With strike and mounting screws.
- Finish - Trim, US4, satin brass
OPTIONAL FEATURES:
- Mogul cylinder - Specify "MO" for keying locks
into existing Mogul system.
- Modification for builders' hardware key cylinder - May
be modified to accept a builders' hardware cylinder. Cylinder must be 1-5/32"
diameter, 1-1/4" long (from under head including cam), and have a removable
cam.
NOTE: Cylinders and keys must be sent to Folger
Adam Security Inc. for assembly in locks.
- Safety knob set - Specify "SK".
- For safety knobs on both sides, specify "Double
SK".
- Indication switches - To provide remote indication of
lock status, one or two switches may be supplied, depending upon circuit requirements.
Specify switch options by letter:
"A" Switch - An internal switch to indicate that the latchbolt is deadlocked.
"C" Switch - A switch installed behind the strike to indicate that the
latchbolt is extended into the strike.
Note: When a door is open, the deadlock actuator
and/or "C" switch may be manually depressed, giving a false indication
that the door is closed and locked. To eliminate this false indication, a door
position switch should be installed and wired in series with the indication switches.
Then, a secure indication can be produced only after three conditions have been
met:
1) the indication switch button is depressed;
2) the lockbolt is extended;
3) the door is closed.
|
|
STANDARD FEATURES:
- Fits ANSI door preparation - Standardized installation
in hollow metal doors modified to accommodate lock body thickness of 1-1/8".
(ANSI A156.13, Grade 1)
- Door thickness - Doors must be 1-3/4" to 2-1/2"
thick.
- Armored front - 8" x 1-1/4" steel, 10 gauge.
- High strength case and cover - 12 gauge wrought steel,
zinc chromated.
- Corrosion-resistant working parts - Internal working
parts are stainless steel or zinc chromated steel.
- Durable hubs - Solid stainless steel construction, on
the square.
- Spindle - 11/32" cold drawn steel.
- Latchbolt - ū" throw stainless steel, bolt head.
- Deadbolt - 1" throw stainless steel with two hardened
roller inserts to inhibit sawing.
- Latchbolt size - 11/16" x 1-1/4".
- Deadbolt size - 11/16" x 1-1/2".
- Reversible - Locks are field reversible. Handing, if
known, should be specified upon odering.
- Key cylinder - Furnished with UL437 listed, level 1
security Maxi-Mogul Cylinder.(D9300)
- Key Cylinder - Furnished with Builders Hardware 6 pin
Cylinder(A9300)
- Screws - Torx tamper-resistant screws (require special
screwdriver)
- Taper-resistant - All bolts, including the auxiliary
latchbolt are fully tunneled to help prevent jamming of the mechanism with foreign
material.
- Strike - Supplied with curved-lip strike having 1-1/4"
lip length, and dust box. Buffed stainless steel only.
- Finish - US4 (ANSI/BHMA 606), US26 (ANSI/BHMA 625),
US26D (ANSI/BHMA 626), US32 (ANSI/BHMA 629), US32D (ANSI/BHMA 630).
OPTIONAL FEATURES:
- Strike switch - Strike mounted indication switch for
electrically monitored systems.
TRIM DESIGNS:
Knobs:
Specify KR for knob and rose trim with lock.
Material: Brass or stainless steel, detention design.
Dimensions: 2-1/4" diameter.
Safety knob: Specify SK knob and side installed on.
Roses:
Material: Brass or stainless steel.
Dimensions: 2-11/16" diameter, concealed trim design.
LeverTrak Handle Guide Sets
LT & LTE Handle Guide Sets should be specified for abusive environments, or
high frequency doors. The track prevents damage to mortise locks from over-travel
of the handle.(For complete details on the LeverTrack click here)
CYLINDER DATA:
Maxi-Mogul Key Cylinders-
D9300 Series Mortise Locks are provided with Maxi-Mogul key Cylinders, six pin
tumbler.
Keys are sold separately, and registered at the factory.
Cylinder collar- An adjustable cylinder collar will be provided to suit the cylinder
length and door thickness when both locks and cylinders are ordered. If not specified,
rings will be for 1-3/4" thick doors.
Keys must be ordered separately.
Trim/cylinder accessories- The following trim
items will be provided per the lock function specified.
LCK (Limited Control Key)-
Modification for Models D9336, D9365, D9366, D9367.Factory
provided cylinder is modified to allow change key a limited rotation to retract
the latchbolt. Master key is unlimited and will operate both latch and deadbolt.
Thumbturn and escutcheon-
Furnished with Models D9304, D9313, D9317, D9320, D9321,
D9364 and D9367.
Thumbturn furnished with Model D9319.
Supplied with Torx tamper-resistant No. 6 x 3/8"
screws.
STRIKES:
D9300 Series Locks are supplies with a curved lip strike
having a 1-1/4" lip length for use with doors 1-3/4" to 2" thick.
Buffed stainless steel finish only.
Strike with indication switch- For electric monitoring.
Strike box - Wrought steel, zinc plated, reversible for installation with flat
or curved-lip strike.
Special lip lengths - Strikes are installed on the same vertical centerline as
the lock. 1-1/4" lip length is standard. 1-1/2" lip length is optional
for doors from 2-1/8" to 2-1/2" thick. |
|
|